Routine Cleaning

• Frequency: Clean aluminum frames every 3 to 6 months. In coastal or industrial areas, where salt or pollutants may cause more rapid deterioration, consider cleaning them every 2 to 3 months.
• Method: Use a mild detergent solution (mix a small amount of dish soap with warm water) and a soft cloth or sponge to gently clean the frames. Avoid abrasive cleaners and pads that can scratch the aluminum surface.
• Rinsing: After washing, rinse the frames thoroughly with clean water to remove any soap residue.
• Drying: Dry the frames with a clean, soft cloth to prevent water spots.

Sliding Products

• Operation: Avoid using the door or the window if it drags along the track, as this can lead to scratching and potentially damage the rollers (refer to the Roller Adjustment section for guidance).

Roller Adjustment:

Should you need to adjust the rollers, follow the straightforward steps below.

Move the door until it’s nearly shut. Ensure it’s straight relative to its frame and not touching the track.

If adjustment is needed, you can raise the door by turning any of the adjustment screws clockwise, or lower it by turning them counterclockwise. Make sure to lift the door slightly to remove its weight from the rollers before making any adjustments.

Hardware and Moving Parts

• Lubrication: Annually check and lubricate hinges, locks, and rollers with a silicone-based lubricant to keep them operating smoothly. Avoid oil-based lubricants, as they can attract dust and debris.
• Tightening: Regularly check and tighten any loose screws and hardware to ensure everything functions correctly.

Tracks and Seals

• Cleaning Tracks: Keep the tracks and weep holes (drainage holes) free of dirt and debris to ensure smooth operation and prevent water buildup. Use a vacuum with a soft brush attachment to gently remove any accumulation.
• Seal Inspection: Check the rubber seals around the windows and doors periodically to ensure they are intact and not damaged. Replace any worn or damaged seals to maintain insulation and waterproofing.

Glass Care

• Cleaning: Clean the glass with a mixture of mild detergent and water, using a soft cloth or sponge, and then rinse with clean water. You can also use a commercial glass cleaner for a streak-free finish.
• Avoiding Scratches: Use caution to prevent scratching the glass. Do not use abrasive cleaners or sharp objects for cleaning.

General Tips

• Avoiding Pressure Washing:High-pressure washing can damage seals and force water into the structure. Use gentle cleaning methods instead.
  
• Immediate Action on Damage: If you notice any damage to the frames, glass, or hardware, address it promptly to prevent further issues.
• Professional Help: For significant issues or if you’re unsure about performing maintenance, ring us for professional advice.

By following these maintenance tips, you can help ensure that your aluminum windows and doors remain functional, efficient, and beautiful for many years to come.